Little Giant TE-6-MD-SC 115/230-Volt, 50/60 Hz, 1/2 HP, 2280 GPH Magnetic Drive Non-Submersible Mildly Corrosive Chemical Transfer Pump (must be field-wired), Black/White, 586504

The Little Giant MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, nonsubmersible use. Volute and impeller are glass-filled polypropylene for excellent chemical resistance. Ceramic shaft and thrust washers are 99.5% pure alumina for excellent wear and trouble-free service. Pumping heads are easily rotated, cleaned or serviced. Spindle shaft is supported at both ends to prevent impeller damage during startup and stop of pump.The TE-6-MD-SC is a dual voltage 115/230-volt 50/60 hz pump with a thermally protected, totally enclosed, fan-cooled, split phase motor that delivers up to 2280 gph. This pump comes with a conduit box but does not come with a cord or plug so must be field wired. Electric experience is required. The TE-6-MD-SC is equipped with a 1" FNPT intake and a 3/4" MNPT discharge.

• APPLICATIONS: designed for in-line, non-submersible use and efficiently handles the recirculation of mildly corrosive solutions or solvents
• EXCELLENT CHEMICAL RESISTANCE: features a leakproof, seal-less magnetic drive; volute, magnet housing and impeller are glass-filled polypropylene; ceramic shaft and thrust washers are 99.5% alumina
• EASY TO MAINTAIN: pumping heads are easily rotated, for cleaning or servicing with no special tools required
• MOTOR SPECIFICATIONS: 115/230 Volts; 50/60 Hz; 1/2 HP; 115 Volts = 11.6 Amps at 50 Hz; 9.4 Amps at 60 Hz; 230 Volts = 5.8 Amps at 50 Hz; 4.7 Amps at 60 Hz; 640 Watts at 50 Hz; 835 Watts at 60 Hz
• PUMP SPECIFICATIONS: 2280 GPH at 5-ft. lift; 51' shutoff; max 22 PSI; 1" FNPT intake; 3/4" MNPT discharge; must be field wired; max fluid temperature = 135°F; max ambient air temperature = 77°F