20Pcs 16 Colors Heat Transfer Vinyl 12" x 10" Sheets T-Shirt HTV Bundle Pack Set

<p>Material Specification:</p><ul><li>PU Composition</li><li>Thickness:198 Microns / 7.8 Mils (Please make sure plotter is capable of cutting such thickness)</li><li>Heat pressure sensitive backing</li><li>Matte Solid Finish</li></ul><p>Application Instruction (Home Iron)</p><ul><li>Set iron dial between Cotton and Linen</li><li>Cover design with Kraft paper or non-stick cover sheet</li><li>Place on flat, hard surface (ironing board not recommended)</li><li>Press iron with medium/firm pressure (do not slide iron)</li><li>Press each section of design for 10-15 seconds</li><li>If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds</li><li>let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.</li></ul><p>Application Instructions (Heat Press)</p><ul><li>Cut in reverse</li><li>Weed excess material</li><li>Preheat all fabric prior to pressing for best results</li><li>Apply design at 305F/150C-160C for 12-15 seconds</li><li>let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.</li></ul><p>Applies to:</p><ul><li>100% Cotton</li><li>Poly / Cotton Blends</li><li>100% Polyester</li></ul><p>Vibrant Colors: 3x Black 3x White 1x Gold 1x Silver 1x Dark Red 1x Maple Orange 1x Passion Pink<br>1x Bubble Gum Pink 1x Purple 1x Lemon Yellow 1x Green 1x Sky Blue 1x Navy Blue 1x Fluorescent Yellow&nbsp;1x Fluorescent Orange 1x Fluorescent Pink&nbsp;</p>

Material Specification:

• PU Composition
• Thickness:198 Microns / 7.8 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure-sensitive backing
• Matte Solid Finish

Application Instruction (Home Iron)

• Set the iron dial between Cotton and Linen
• Cover design with Kraft paper or a non-stick cover sheet
• Place on a flat, hard surface (ironing board not recommended)
• Press the iron with medium/firm pressure (do not slide the iron)
• Press each section of the design for 10-15 seconds
• If areas of design lift after application, replace the cover sheet and re-press for 5-10 seconds
• Let it cool for about 30-45 seconds, and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric before pressing for the best results
• Apply design at 305F/150C-160C for 12-15 seconds
• Let it cool for about 30-45 seconds, and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester

Vibrant Colors: 3x Black 3x White 1x Gold 1x Silver 1x Dark Red 1x Maple Orange 1x Passion Pink
1x Bubble Gum Pink 1x Purple 1x Lemon Yellow 1x Green 1x Sky Blue 1x Navy Blue 1x Fluorescent Yellow 1x Fluorescent Orange 1x Fluorescent Pink