1100W 5L Dental Machine Agar Mixer Stirrer Lab Fully Automatic Heating and Mixing Machine

Technical parameters: Working power supply: 110V 60Hz/ 220V 50Hz Rated power: 1100W Heating power: 1000W Capacity: 5L Product Overviews: The Agar Mixer Machine is used for melting and mixing duplicating in prosthetic dentistry. It is a necessary equipment for duplicating molds. The mixing tank of the machine is made of stainless steel.This is an economic machine which can melt and heat very quickly. The machine can heat, mix, cool down automatically. All operations can be done by pressing the buttons. Precautions for use: Press the heat preservation button after the temperature reaches the predetermined temperature and the agar is completely melted. Main machine*1； Rubber support Foot*4； Manual*1； Agar discharge valve*1； Glass Cover*1； Power cord*1

• Heat Preservation Function: The upper and lower limits of temperature are controlled by two digital video card temperature controllers respectively. The lower limit temperature(casting temperature) has the function of insulation, so that the molten agar is kept basically constant at the service temperature.
• Heated Evenly: The dental agar mixer adopts a resistance wire attached to the outside of the pot and a heating strip, which can be heated evenly.Used stainless steel inner pot and the pot is evenly stirred to avoid local parts high temperature.
• Convenient Temperature Adjustment: You can set the heating temperature you want to achieve.The machine is already set to the proper temperature. If you need other temperature, you can adjust it. After reaching the preset temperature, the machine will remind you with a buzzer for a few seconds.
• Digital thermostat: Digital thermostat with upper and lower temperature is adopted, which can be thawed at low temperature to make the agar enter the temperature near the critical point of solidification.
• Stainless Steel Inner Pot: Use stainless steel inner pot, stir evenly in the pot to avoid local high temperature.